Mechanical closing of the paperboard package and the effect of the shape of paperboard package to its manufacturability
Salkinoja, Pekka (2009)
Tiivistelmä
The main objective of this thesis was to design a hinge and a closing mechanism for the plastic rim of a paperboard package. Of the hinge and closing mechanisms the 3D-models were designed using SolidWorks program and the functionality of the mechanisms was tested with rapid prototype models. When a mechanism that worked was found, the manufacturability of the mechanisms was tested in an injection molding machine with changeable inserts.
Another objective of this thesis was to test the effect of the shape of paperboard package to its manufacturability. The effect of the packages shape was tested with plastic tools made for three different shaped trays. Suggestions for further research were made according to the results of the thesis. Tämän diplomityön päätarkoitus oli kehittää sarana- ja suljentamekanismit kartonkipakkauksen reunukseen. Sarana- ja suljentamekanismeista mallinnettiin 3D-mallit SolidWorks-ohjelmalla ja mallien pohjalta teetettiin pikamallit. Pikamallien avulla mekanismien toiminnallisuus pystyttiin testaamaan käytännössä. Kun toimivat mekanismit oli löydetty, valmistettiin vaihtopalat ruiskuvalukoneeseen, joiden avulla mekanismien valmistettavuus pystyttiin testaamaan.
Lisäksi diplomityön tarkoituksena oli selvittää, miten kartonkipakkauksen muoto vaikuttaa sen valmistettavuuteen. Kartonkipakkauksen muodon vaikutusta testattiin kolmella erilaisella konseptilla, joille valmistettiin muoviset työkalut. Työn aikana saatujen tulosten pohjalta tehtiin jatkokehitysehdotuksia.
Another objective of this thesis was to test the effect of the shape of paperboard package to its manufacturability. The effect of the packages shape was tested with plastic tools made for three different shaped trays. Suggestions for further research were made according to the results of the thesis.
Lisäksi diplomityön tarkoituksena oli selvittää, miten kartonkipakkauksen muoto vaikuttaa sen valmistettavuuteen. Kartonkipakkauksen muodon vaikutusta testattiin kolmella erilaisella konseptilla, joille valmistettiin muoviset työkalut. Työn aikana saatujen tulosten pohjalta tehtiin jatkokehitysehdotuksia.