Hae LUTPubista
Aineistot 1-10 / 11
Motion Synchronization of Biaxial Linear Tooth Belt Drive System
(IEEE, 2018-11-08)
Many manufacturing processes depend on accurate multi-axis movements. Development of drive technology has replaced the need of mechanical couplings and cams in synchronized manufacturing operations. In this paper motion ...
Direct Liquid Cooling Method Verified With a Permanent-Magnet Traction Motor in a Bus
(IEEE, 2019-04-01)
Direct liquid cooling (DLC) of electrical machine windings is a clearly effectual cooling method for high-torque and high-power-density applications needed, especially, in heavy vehicles. Usually, in electric vehicles, the ...
Mitigation of inverter-induced noncirculating bearing currents by introducing grounded electrodes into stator slot openings
(IEEE, 2020-12-23)
Modern converter-supplied AC motors are exposed to bearing currents. Despite extensive research and development, the industry still does not have a final solution with acceptable cost and high efficiency. This paper focuses ...
Measurement Accuracy Requirements for the Efficiency Classification of Converters and Motors
(IEEE, 2019-11-28)
Electrical machines play a major role in the electrical energy consumption in the modern world; therefore, the efficiency of electrical machines has been regulated for a long time by different authorities. Recently, the ...
Experimental Investigation of a 75 kW Induction Motor Drive System Losses and Efficiency
(IEEE, 2019-12-09)
The frequency converter driven IM can be used as a reference for the efficiency level of a drive system. In here, the losses and efficiency of a 75 kW IE3 -rated modern squirrel-cage induction motor are investigated ...
Analytical Evaluation of High-Efficiency Induction Motor Losses
(IEEE, 2019-08-05)
An analytical motor design-based approach is used to evaluate the major loss components of a premium-efficiency (IE3)four-pole squirrel-cage induction machine. In the analytical approach, the geometry of the machine and ...
Mitigating noncirculating bearing currents by a correct stator magnetic circuit and winding design
(IEEE, 2020-04-06)
Different mechanisms by which bearing currents flow inside the electrical machine are well studied. In contrast, investigation and development of different techniques to mitigate these currents remain a field for improvement, ...
Investigation of a Direct Liquid Cooling System in a Permanent Magnet Synchronous Machine
(IEEE, 2019-10-08)
A high demand for electrification of the transport sector has resulted in a need to provide compact and reliable electric power trains where the electric machine is a key element. The cooling system has a strong impact on ...
Determination of High-Frequency Harmonic Power in Converter-Fed Motors
(IEEE, 2022-10-13)
This paper focuses on usage of frequency domain power analysis on harmonic power extraction in converter-fed motor measurements. Synchronous generator and frequency converter supplies are compared in 16 operating points ...
On the application of extended grounded slot electrodes to reduce non-circulating bearing currents
(IEEE, 2022-05-11)
Power-electronic-Inverterconverter-induced motor bearing currents are a widespread problem in the field of electrical drives. Parasitic capacitances between the electrical machines parts provide a path for leakage currents, ...