Hae LUTPubista
Aineistot 1-5 / 5
Ecodesign of Construction and Demolition Waste-Derived Thermoplastic Composites
(Lappeenranta-Lahti University of Technology LUT, 2020-12-12)
The use of recycled materials in composites has been studied since the 1990s. Research has traditionally focused on technical properties, as well as the recyclability of materials. How these composites should be used or ...
Stress components and local effects in the fatigue strength assessment of fillet weld joints made of ultra-high-strength steels
(Lappeenranta-Lahti University of Technology LUT, 2020-12-04)
Ultra-high-strength steels (UHSSs) enable a significant reduction in material usage compared to mild steels and, thus, provide energy-efficient solutions for structural applications. In welded steel components, an increase ...
Study of key techniques in the vacuum vessel assembly for the future fusion reactor
(Lappeenranta-Lahti University of Technology LUT, 2020-12-14)
Effective use of fusion energy is one important way to maintain sustainable development for human beings. The China fusion engineering test reactor (CFETR) is a nextgeneration fusion experimental device planned for ...
Thermal analysis of dissimilar weld joints of high-strength and ultra-high-strength steels
(Lappeenranta-Lahti University of Technology LUT, 2020-06-30)
Advances in steel production processes in the last two decades have enabled the production of novel materials with improved strength, weldability and usability. Many industries are implementing these novel materials into ...
Dynamic and thermal modeling of touch-down bearings considering bearing non-idealities
(Lappeenranta-Lahti University of Technology LUT, 2020-06-26)
In an active magnetic bearing (AMB) supported rotor, the touchdown bearings support the rotor in case of an electromagnetic field failure or a fault in the control system. In this work, a dynamic and thermal model of ...