Hae LUTPubista

Preparation of M16 thread tap for additive manufacturing was done in the form of design and topology optimization with intention of experimental tapping performance validation for a hybrid manufactured M16 tap in which ...

Tässä kandidaatintyössä tutkittiin, mitä asioita tulisi ottaa huomioon, kun yritys on aloittamassa metallien lisäävää valmistusta käyttäen jauhepetisulatusprosessia. Työn tavoitteena on antaa alustava kuva siitä, mitä ...

Aim of this thesis was to study why deformations occur in metal parts made by laser powder bed fusion and what is the deformation shape. This thesis was done by conducting a literature review by searching and collecting ...

The purpose of conducting this thesis is to develop a metal 3D printing process for jewellery production utilizing Titanium, Gold, Stainless Steel and Silver and to design a product to be additively manufactured for jewellery ...

Flow efficiency and weight are important parts of hydraulic and pneumatic system’s industry. As manufacturers keep pushing the limits of flow efficiency every year, applications of 3D printing models for hydraulic and ...

Use of geopolymers in construction industry instead of traditional concretes has the potential to reduce produced CO2 emissions significantly. 3D printing can be utilized to promote sustainability even more as disposable ...

The objective of this research work is to design innovative nozzle for wire-feed laser metal deposition with integration of wire feeding nozzle, smoke suction technique and shielding gas supply all in single nozzle head. ...

Aim of this master thesis was to find out which specific metal materials are the most widely used by Finnish metal and mechanical engineering industry. Other goals were to find out are the materials additively manufacturable ...

Tämän kandidaatintyön tavoite oli suunnitella LUT-yliopiston Teräsrakenteiden laboratoriolle työkalupää, jota olisi mahdollista käyttää leikattujen levyreunojen väsymiskestävyyden parantamiseen. Suunnittelun lähtökohtana ...

This study was carried out to investigate the metal material needs of Finnish industry for laser-based powder bed fusion (L-PBF), which belongs to additive manufacturing (AM) technologies, which are also known as 3D printing ...