Hae LUTPubista
Aineistot 31-40 / 98
Sustainable carbon capture in oil refineries
(2019)
Carbon capture is a radical way to reduce greenhouse gas emissions globally to mitigate the effects of climate change when CO2 is stored permanently or utilized sustainably. Modern oil refineries are large stationary ...
Carbon footprint of CO2-based polypropylene via methanol-to-olefins route
(2020)
Plastic is one of the most widely used materials today owing to its versatility. However, the rapidly growing plastics industry is largely dependent on fossil fuels and the source of ever-increasing greenhouse gas (GHG) ...
Pipe repair renovation of existing apartment buildings and the potential of the protected decentralized apartment building domestic hot water utility model
(2021)
The heat losses of hydronic space heating and domestic hot water (DHW) systems of the centralized apartment building utility model can be as high as 50 % of the total energy need of the systems. The centralized utility ...
Intensification of mechanical pulp's drying process and its impacts on greenhouse gas emissions : case Joutseno
(2021)
This master’s thesis was ordered by Metsä Board Joutseno. The goal was to assess the impacts which the new roll press would have on pulp’s dry matter content, flash drying process’ energy consumption and greenhouse gas ...
Energy efficiency improvements for existing buildings with IoT
(2020)
The energy sector is going towards transition, where new technologies can transform the whole sector, mitigate emissions and create new opportunities. Also, buildings have a role in the transition. Typically, buildings ...
Metsäteollisuuslaitosten jäte- ja jäähdytysveden lämpökuorman määrittäminen ja valvonta
(2020)
Tämän kandidaatintyön tavoitteena on selvittää Suomen kemiallisen puunjalostusteollisuuden toiminasta muodostuvan lämpökuorman syntyperä vesi- ja energiataseiden avulla sekä tarkastella lämpökuormaan liittyviä valvontave ...
Human factor management method review and service design
(2020)
This master's thesis explored human factor management in the chemical and process industries. The aim was to find out what kind of human factor management methods there are, and which would provide added value to the ...
Miehittämättömien ilma-alusten käyttö ympäristötekniikassa
(2020)
Tässä kandidaatintyössä tarkastellaan käyttökohteita, joissa miehittämättömät ilma-alukset tarjoavat etuja ympäristötekniikan alalla. Työssä tutustutaan miehittämättömien ilma-alusten kehitykseen, niiden erilaisiin tyyppeihin ...
Ligniini kemiallisessa metsäteollisuudessa ilmastonmuutoksen näkökulmasta
(2020)
Tämän kandidaatintyön tavoitteena on selvittää, kuinka kemiallisen metsäteollisuuden sivuvirran ligniinin ominaisuuksia voitaisiin hyödyntää. Ligniiniä käytetään pääsääntöisesti metsäteollisuuden polttoaineena, mutta uusien ...
Puukenttien hulevesien käsittely ja vesistöpäästöt
(2020)
Tämän työn tavoitteena on selvittää, miten metsäteollisuuslaitokset ovat vieneet hulevesien käsittelyä koskevat BAT-päätelmät käytäntöön. Työssä tehdään koontoa siitä, miten Suomessa kuorellisen puun varasto- ja käsittelyalueiden ...