Hae LUTPubista
Aineistot 1-9 / 9
Ferrite Permanent Magnet Hysteresis Loss in Rotating Electrical Machinery
(Lappeenranta-Lahti University of Technology LUT, 2019-11-15)
Electrical machines with permanent magnets (PMs) find numerous applications in present energy-efficient technologies. A reasonable compromise in terms of costs and efficiency makes electrical machines with ferrite PMs a ...
Modeling and Parameter Estimation of Double-Star Permanent Magnet Synchronous Machines
(Lappeenranta University of Technology, 2014-03-05)
The power rating of wind turbines is constantly increasing; however, keeping the voltage rating at
the low-voltage level results in high kilo-ampere currents. An alternative for increasing the power
levels without raising ...
Broadband excitation in the system identification of active magnetic bearing rotor systems
(Lappeenranta University of Technology, 2011-11-04)
One of the targets of the climate and energy package of the European Union is to increase the energy efficiency in order to achieve a 20 percent reduction in primary energy use compared with the projected level by 2020. ...
AMB system for high-speed motors using automatic commissioning
(Lappeenranta University of Technology, 2012-12-18)
The general trend towards increasing e ciency and energy density drives the industry to
high-speed technologies. Active Magnetic Bearings (AMBs) are one of the technologies
that allow contactless support of a rotating ...
Development of hydrometallurgical reactor leaching for recovery of zinc and gold
(Lappeenranta University of Technology, 2016-12-16)
Hydrometallurgical methods offer promising techniques for resolving the challenge of producing
metals essential to modern life in an environmentally and economically sustainable manner.
Leaching has a central role in ...
Design and Simulation of High-Speed Rotating Electrical Machinery
(Lappeenranta University of Technology, 2016-01-22)
Global energy consumption has been increasing yearly and a big portion of it
is used in rotating electrical machineries. It is clear that in these machines
energy should be used efficiently. In this dissertation the aim ...
Three-dimensional modeling of biomass fuel flow in a circulating fluidized bed furnace
(Lappeenranta University of Technology, 2015-06-25)
The reduction of greenhouse gas emissions in the European Union promotes the
combustion of biomass rather than fossil fuels in energy production. Circulating fluidized
bed (CFB) combustion offers a simple, flexible and ...
Identification of magnetically levitated machines
(Lappeenranta-Lahti University of Technology LUT, 2020-06-16)
Magnetically levitated machines use magnetic levitation to maintain the separation between the bearing races. They offer various benefits compared with other types of bearings: no contact between the bearing races, the ...
EDTA- and DTPA-functionalized silica gel and chitosan adsorbents for the removal of heavy metals from aqueous solutions
(Lappeenranta University of TechnologyLaboratory of Green Chemistry, 2011-08-05)
Adsorbents functionalized with chelating agents are effective in removal of heavy metals from aqueous solutions. Important properties of such adsorbents are high binding affinity as well as regenerability. In this study, ...