Selaus nimekkeen mukaan kokoelmassa Tieteelliset julkaisut
Aineistot 359-378 / 1322
-
EDEN: Deep Feature Distribution Pooling for Saimaa Ringed Seals Pattern Matching
(Springer, Cham, 21.01.2023)In this paper, pelage pattern matching is considered to solve the individual re-identification of the Saimaa ringed seals. Animal reidentification, together with the access to a large amount of image material through camera ... -
Effect of Converter Topology on the Specific Energy Consumption of Alkaline Water Electrolyzers
(IEEE, 17.10.2018)Water electrolysis will be used to produce renewable hydrogen for energy storage and Power-to-X applications in the future renewable-energy-based energy systems. Therefore, the energy efficiency of hydrogen production will ... -
Effect of different co-solvents on biodiesel production from various low-cost feedstocks using Sr–Al double oxides
(Elsevier, 14.08.2019)The main objective of the present paper comprises the investigation of biodiesel production from low-cost feedstock such as lard oil and waste cooking oil (WCO) using Sr-Al double oxides. Nanocatalyst was characterised ... -
Effect of fouling and cleaning upon the surface charge and porosity of polyethersulphone membranes during coffee brew decaffeination
(Elsevier, 22.07.2023)Filtration processes could offer a viable alternative to use of solvents for the production of reduced caffeine coffee beverages (so called ‘half-decaf’) which have recently gained increased commercial attention. However ... -
Effect of heat input on the mechanical properties of welded joints in high strength steels
(Taylor & Francis, 2015)Experiments were carried out to determine the properties of the welded joints in 8mm thick high-strength steels produced by quenching and tempering and thermomechanical rolling with accelerated cooling (tensile strength ... -
Effect of heat integration method and torrefaction temperature on the performance of an integrated CHP-torrefaction plant
(Elsevier, 01.07.2015)An important factor for industrial-scale implementation of torrefaction – a thermal pre-treatment technology that enhances the fuel characteristics of biomass – is the requirement for a low-cost source of heat energy. ... -
Effect of loading type on the fatigue strength of asymmetric and symmetric transverse non-load carrying attachments
(Wiley, 2016)This study considers the effect of bending loading and the symmetry of joints on the fatigue strength of transverse non-load carrying attachments. Conventionally, the fatigue strength of a welded joint has been determined ... -
Effect of Low Concentrations of Lithium Chloride Additive on Cellulose-Rich Ultrafiltration Membrane Performance
(MDPI, 05.02.2023)Various water treatment processes make extensive use of porous polymeric membranes. A key objective in membrane fabrication is to improve membrane selectivity without sacrificing other properties such as permeability. ... -
Effect of mixing on enzymatic hydrolysis of cardboard waste: Saccharification yield and subsequent separation of the solid residue using a pressure filter
(Elsevier, 04 / 2012)Cellulosic wastes, from sources such as low-quality cardboard and paper, are regarded as potential feedstocks for bioethanol production. One pathway from these cellulosic materials to ethanol is saccharification (hydrolysis) ... -
Effect of non-ideally manufactured riblets on airfoil and wind turbine performance
(Elsevier, 25.03.2020)Riblets are a passive flow control method, which can be used for drag reduction, especially with small wind turbines that have a low Reynolds number. Riblet manufacturing, however, is a challenging task and the required ... -
Effect of power quality on the design of proton exchange membrane water electrolysis systems
(Elsevier, 29.09.2020)Water electrolyzer technologies may play a key role in the decarbonization of the fossil-fueled world economy. Electrolytic hydrogen production could bridge emission-free power generation and various energy end-use sectors ... -
Effect of Precipitation Temperature on the Properties of Cellulose Ultrafiltration Membranes Prepared via Immersion Precipitation with Ionic Liquid as Solvent
(MDPI, 25.09.2018)Supported cellulose ultrafiltration membranes are cast from a cellulose-ionic liquid solution by the immersion precipitation technique. The effects of coagulation bath temperature and polymer concentration in the casting ... -
Effect of thiourea on electrocrystallization of Cu–Sn alloys from sulphate electrolytes
(Elsevier, 02.07.2020)In this work, the effect of thiourea on the initial stages of the Cu–Sn electrodeposition in the potential range of the underpotential deposition (UPD) of tin from the sulphate electrolyte was studied by linear sweep ... -
Effect of titanium substitution and temperature variation on structure and magnetic state of barium hexaferrites
(Elsevier, 17.12.2020)A number of solid solutions based on BaFe12−xTixO19 M-type barium hexaferrite doped with titanium cations up to x = 2.00 were obtained using conventional ceramic technology. The phase composition, crystal structure and ... -
Effect of Vaneless Diffuser Width on the Overall Performance of a Centrifugal Compressor
(Sage Journals, 2011)Three vaneless diffuser designs, varying in diffuser width, for centrifugal compressor were studied experimentally. Along with the diffuser width, the tip clearance was altered. The compressor overall performance and ... -
Effective momentum induced by steam condensation in the oscillatory bubble regime
(Elsevier, 01.06.2019)The spargers used in Boiling Water Reactors (BWR) discharge steam from the primary coolant system into a pool of water. Direct steam condensation in subcooled water creates sources of heat and momentum determined by the ... -
Effective removal of hazardous trace metals from recovery boiler fly ashes
(Elsevier, 15.02.2018)The objective of this study is to introduce a treatment sequence enabling straightforward and effective recovery of hazardous trace elements from recovery boiler fly ash (RBFA) by a novel method, and to demonstrate the ... -
Effectiveness of Hackathons to Cultivate a Sustainability Mindset among Engineering and Computing Students
(IEEE, 26.01.2024)The use of hackathons to teach students problem-solving and innovation has been gaining popularity in universities in recent years. At the same time, more universities are also incorporating sustainability into their ... -
Effectiveness of innovation capability development methods
(Taylor & Francis, 26.09.2016)The literature presents numerous methods and practices for facilitating organizational innovation capabilities. Less attention has been paid to indicating the actual impact of these methods on different aspects of innovation ... -
Effects of Brief Integrated Information Literacy Education Sessions on Undergraduate Engineering Students' Interdisciplinary Research
(Taylor & Francis Online, 2017)Engineering students often conduct information searches without sufficient consideration of the context of their research topic. This article discusses how development of a new information literacy (IL) mindset through ...