Selaus nimekkeen mukaan kokoelmassa Tieteelliset julkaisut
Aineistot 490-509 / 1333
-
Fabrication of biodegradable kraft paper from buffing dust and jute fiber: Green solutions for packaging
(Wiley, 21.09.2023)Addressing solid waste recycling, this study aims to develop biodegradable kraft paper from buffing dust (BD) and post-consumed jute fiber (JF). Employing a simple solution casting method with a polyurethane binder, the ... -
Facilitating innovation capability through performance measurement: A study of Finnish SMEs
(Emerald Group Publishing, 06.09.2013)Purpose The study aims to clarify the issue of whether measurement has a positive effect on different aspects of innovation capability. The study contributes to the current understanding in two ways; first by presenting ... -
Facilitating SMEs' profitability through total quality management: the roles of risk management, digitalization, stakeholder management and system deployment
(Emerald Publishing Limited, 28.12.2021)Purpose - This study investigates the effect of total quality management (TQM) on small and medium enterprises (SMEs)’ profitability by examining whether the new TQM dimensions of risk management, digitalization, stakeholder ... -
Factors fostering vocational students’ workplace learning success in the real workplace environment
(Taylor & Francis, 23.10.2019)The present paper proposes a conceptual model in which both personal and perceived workplace-related factors affect vocational students’ workplace learning success in real workplace environments, with workplace learning ... -
Factors influencing the adoption of m-government: Perspectives from a namibian marginalised community
Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering (Springer, Cham, 14.02.2020)Mobile-government (m-Government) services adoption is being advanced as an alternative solution for addressing challenges faced by electronic-government (e-Government) adoption in marginalised communities. However, factors ... -
Failure of confined granular media due to pullout of an intruder: from force networks to a system wide response
(Royal Society of Chemistry, 17.07.2020)We investigate computationally the pullout of a spherical intruder initially buried at the bottom of a granular column. The intruder starts to move out of the granular bed once the pulling force reaches a critical value, ... -
Fast GRNN-Based Method for Distinguishing Inrush Currents in Power Transformers
(IEEE, 08.09.2021)Differential protection, as the key protection element in the power transformers, has always been threatened with sending false trips subjected to external transient disturbances. As a result, differential protection needs ... -
Fast oxidative pyrolysis of eucalyptus wood residues to replace fossil oil in pulp industry
(Elsevier, 15.01.2023)This study evaluates the potential of the oxidative fast pyrolysis (OFP) of eucalyptus wood residues (EWR) for producing bio-oil to replace fossil fuels in the lime kilns of the pulp industry. OFP is an alternative to ... -
Fatigue Performance of GMA-Brazed Non-Load Carrying Joints Made of Ultra-High Strength Steel
(Springer International Publishing AG, 2018)With the aim of maximizing energy efficiency, the use of low-alloyed ultra-high strength steels (UHSS) has greatly increased in vehicles and other transport applications in recent decades. Using UHSS, equivalent ultimate ... -
Fatigue strength assessment of duplex and super-duplex stainless steels by 4R method
(Springer Berlin Heidelberg, 04.10.2018)Duplex and super-duplex stainless steels are increasingly used in applications where good fatigue strength is demanded in addition to corrosion resistance. In this research work, the fatigue strength of duplex and super-duplex ... -
Fatigue strength assessment of ground fillet-welded joints using 4R method
(Elsevier, 29.08.2020)In the present paper, a fatigue analysis for welded joints made of mild, and high- and ultra-high-strength steel grades and post-weld-treated with grinding and combined grinding and peening methods is carried out using ... -
Fatigue strength assessment of TIG-dressed ultra-high-strength steel fillet weld joints using the 4R method
(Elsevier, 10.06.2020)Post-weld treatments can enhance the fatigue strength of weldments by means of improving their geometry or residual stresses, or both. In this study, the fatigue strength of TIG-dressed non-load-carrying cruciform joints ... -
Fatigue strength assessment of ultra-high-strength steel fillet weld joints using 4R method
(Elsevier, 30.11.2019)A fatigue analysis on experimentally tested transverse fillet-welded non-load-carrying T- and X-joints made of S960 and S1100 ultra-high-strength steel was carried out in the present study. The test data consisted of welded ... -
Fatigue strength capacity of load-carrying fillet welds on ultra-high-strength steel plates subjected to out-of-plane bending
(Elsevier, 12.06.2019)Weld root fatigue strength capacity is an important design criterion in load-carrying (LC) fillet welded joints subjected to cyclic loads. This paper elaborates on the weld root fatigue strength capacity of fillet welded ... -
Fatigue strength characterization of high and ultra-high-strength steel cut edges
(Elsevier, 04.12.2020)This paper investigates the fatigue strength characteristics of CO2 laser, fiber laser and plasma cut edges of S690 and S1100 steel grades. The effect on fatigue performance of surface quality, which was examined by contact ... -
Fatigue strength of longitudinal load-carrying welds in beams made of ultra-high-strength steel
(Elsevier, 06.02.2021)The present study experimentally investigates the fatigue strength of longitudinally loaded welded joints in beam structures made of ultra-high-strength steel. Hereby, the effects of different manufacturing methods and ... -
Fatigue strength of misaligned non-load-carrying cruciform joints made of ultra-high-strength steel
(Elsevier, 13.09.2020)Misalignments and distortions in welded plate components act as stress raisers and can significantly decrease the fatigue strength of welded connections. This paper investigates the effect of the plate misalignment of ... -
Fault Location and Faulty Line Selection in Transmission Networks: Application of Improved Gated Recurrent Unit
(IEEE, 02.06.2022)Wide-area measurement systems (WAMS) are efficient tools to estimate the fault location in the large-scale power systems. In this study, a fast and accurate deep learning based structure is proposed to detect the faulty ... -
Feasibility of 100% renewable energy-based electricity production for cities with storage and flexibility
(Elsevier, 16.11.2018)Renewable energy is expected to constitute a significant proportion of electricity production. Further, the global population is increasingly concentrated in cities. We investigate whether it is possible to cost-effectively ...