Hae LUTPubista
Aineistot 1-10 / 19
Direct Liquid Cooling Method Verified With a Permanent-Magnet Traction Motor in a Bus
(IEEE, 2019-04-01)
Direct liquid cooling (DLC) of electrical machine windings is a clearly effectual cooling method for high-torque and high-power-density applications needed, especially, in heavy vehicles. Usually, in electric vehicles, the ...
Cost Minimization of a Permanent Magnet Eddy Current Brake by Multiobjective Particle Swarm Optimization Based on Nonlinear Reluctance Network Modeling
(IEEE, 2021-11-22)
Design optimization of a permanent magnet eddy current brake (PM-ECB) is performed by applying multiobjective particle swarm optimization (MO-PSO) for cost minimization. A previously designed and patented PM-ECB is used ...
Inductance Calculation of Tooth-Coil Permanent-Magnet Synchronous Machines
(IEEE, 2014)
Analytical calculation methods for all the major components
of the synchronous inductance of tooth-coil permanentmagnet
synchronous machines are reevaluated in this paper.
The inductance estimation is different in the ...
Magneto-Thermal Analysis of an Axial-Flux Permanent-Magnet-Assisted Eddy-Current Brake at High-Temperature Working Conditions
(IEEE, 2020-05-07)
This paper proposes an analytic coupled magneto-thermal analysis of an axial-flux (AF) permanent-magnet-assisted (PMA) eddy-current brake (ECB) at high-temperature working conditions. In the topology investigated, permanent ...
Mitigation of inverter-induced noncirculating bearing currents by introducing grounded electrodes into stator slot openings
(IEEE, 2020-12-23)
Modern converter-supplied AC motors are exposed to bearing currents. Despite extensive research and development, the industry still does not have a final solution with acceptable cost and high efficiency. This paper focuses ...
Analytical Evaluation of High-Efficiency Induction Motor Losses
(IEEE, 2019-08-05)
An analytical motor design-based approach is used to evaluate the major loss components of a premium-efficiency (IE3)four-pole squirrel-cage induction machine. In the analytical approach, the geometry of the machine and ...
Mitigating noncirculating bearing currents by a correct stator magnetic circuit and winding design
(IEEE, 2020-04-06)
Different mechanisms by which bearing currents flow inside the electrical machine are well studied. In contrast, investigation and development of different techniques to mitigate these currents remain a field for improvement, ...
Investigation of a Direct Liquid Cooling System in a Permanent Magnet Synchronous Machine
(IEEE, 2019-10-08)
A high demand for electrification of the transport sector has resulted in a need to provide compact and reliable electric power trains where the electric machine is a key element. The cooling system has a strong impact on ...
Replacing Copper with New Carbon Nanomaterials in Electrical Machine Windings
(Praise Worthy Prize, 2015)
Electrical machines have significant improvement potential. Nevertheless, the field is
characterized by incremental innovations. Admittedly, steady improvement has been achieved, but
no breakthrough development. Radical ...
Design of a Traction Motor With Tooth-Coil Windings and Embedded Magnets
(IEEE, 2014)
Traction motor design significantly differs from industrial
machine design. The starting point is the load cycle
instead of the steady-state rated operation point. The speed of
the motor varies from zero to very high speeds. ...