Hae LUTPubista
Aineistot 1-10 / 32
Recovering rare earth elements from phosphogypsum using a resin-in-leach process: Selection of resin, leaching agent, and eluent
(Elsevier, 2019-08-10)
Phosphogypsum (PG) is an attractive secondary raw material for rare earth elements (REEs) because it is abundant and contains significant amounts of REEs. Herein, the resin-in-leach (RIL) process for REE recovery from PG ...
Recovery of valuable metals from argon oxygen decarburization (AOD) dusts by leaching, filtration and solvent extraction
(Elsevier, 2013)
For each ton of steel produced from a typical steelmaking plant, up to several tens of kilograms of dust, containing significant amounts of valuable and/or environmentally harmful metals, are also produced. A hydrometallurgical ...
Continuous ion exchange for hydrometallurgy: Purification of Ag(I)–NaCl from divalent metals with aminomethylphosphonic resin using counter-current and cross-current operation
(Elsevier, 2014)
Continuous simulated moving bed (SMB) type ion exchange processes are usually operated in cross-current mode for metal separations whereas counter-current mode is commonly used for fine chemicals. The use of both process ...
Removal and recovery of arsenic from concentrated sulfuric acid by solvent extraction
(Elsevier, 2019-05-13)
Arsenic-contaminated sulfuric acid solutions are produced in large quantities as by-product during pyrometallurgical processing of sulfide minerals. Options for re-using such acid solutions are increased if the arsenic is ...
Solvent extraction fractionation of Li-ion battery leachate containing Li, Ni, and Co
(Elsevier, 2017)
In this research, the separation of Li, Ni, and Co by solvent extraction was studied from synthetic Li-ion battery waste leachate. The purpose was to propose a process for producing all the metals with over 99.5% purities, ...
Two alternative process routes for recovering pure indium from waste liquid crystal display panels
(Elsevier, 2019-09-25)
Recovering indium from liquid crystal display (LCD) screen waste is important from a sustainability point of view for several reasons: the environmentally hazardous metals are not landfilled, the recovery process involves ...
Ion exchange recovery of rhenium from industrially relevant sulfate solutions: single column separations and modeling
(Elsevier, 2015)
In this study, phenomena behind recovery of Re by weak anion exchangers from sulfate solutions containing Mo and As as impurities were investigated. All the metals exist as different kinds of oxyanions or, at some conditions, ...
Removal of calcium and magnesium from lithium brine concentrate via continuous counter-current solvent extraction
(Elsevier, 2016)
In this research project, a process for purifying Li brine concentrate with a typical composition of Li 30 g/L, Ca 1.36 g/L, Mg 0.049 g/L via solvent extraction was studied. The goal was to remove Ca to below 20 mg/L and ...
Synthesis of hydrometallurgical processes for valorization of secondary raw materials using ant colony optimization and key performance indicators
(Elsevier, 2015-02-16)
An algorithm-based method for synthesis of hydrometallurgical processes using limited amounts of experimental data is presented. The method enables simultaneous selection and sequencing of unit operations and optimization ...
Polyacrylonitrile-encapsulated amorphous zirconium phosphate composite adsorbent for Co, Nd and Dy separations
(Elsevier, 2018)
Recycled Nd and Dy from the end-of-life NdFeB permanent magnet is an important supplement for the increasing demand of rare-earth elements. Thus, there is an urgent need to develop an environmentally friendly recycling ...