Hyppää sisältöön
    • Suomeksi
    • På svenska
    • In English
  • Suomeksi
  • In English
  • Kirjaudu
Näytä aineisto 
  •   Etusivu
  • LUTPub
  • Diplomityöt ja Pro gradu -tutkielmat
  • Näytä aineisto
  •   Etusivu
  • LUTPub
  • Diplomityöt ja Pro gradu -tutkielmat
  • Näytä aineisto
JavaScript is disabled for your browser. Some features of this site may not work without it.

Formation of polyelectrolyte multilayers and polyelectrolyte complexes in dual polymer treatment of papermaking pulp

Birichevskaya, Olga (2010)

Katso/Avaa
nbnfi-fe201101071017.pdf (1.524Mb)
Lataukset: 


Diplomityö

Birichevskaya, Olga
2010

Näytä kaikki kuvailutiedot
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi-fe201101071017

Tiivistelmä

The goal of this study was to find a new approach to modify chemically the properties of paper by improving fiber quality. This Master’s thesis includes the multiple polymer treatment in general and themeasurement methods with which the formation of multilayers and complexes can be noticed. The treatment by an oppositely charged dual polymer system is a good approach to increase paper strength. In this work, starch, a cationic polymer, and carboxymethyl cellulose (CMC), an anionic polymer, were used step-by-step to improve paper strength. The adsorption of cationic starch and CMC on cellulose fibers were analyzed via polyelectrolyte titration. The results showed that paper strength was enhanced slightly with a layer-by-layer assembly of the polymers. However, if the washing stage, which was required for layer-by-layer assembly, was eliminated, the starch/CMC complex was deposited on fibers more efficiently, and the paper strength was improved more significantly.
Kokoelmat
  • Diplomityöt ja Pro gradu -tutkielmat [14752]

Samankaltainen aineisto

Näytetään aineisto, joilla on samankaltaisia nimekkeitä, tekijöitä tai asiasanoja.

  • The effect of cationic-anionic polyelectrolyte multilayer surface treatment on inkjet ink spreading and print quality 

    Mielonen, Katriina
    Acta Universitatis Lappeenrantaensis (Lappeenranta University of Technology, 10.12.2015)
    The focus of the work reported in this thesis was to study and to clarify the effect of polyelectrolyte multilayer surface treatment on inkjet ink spreading, absorption and print quality. Surface sizing with a size press, ...
  • End-of-life RO membranes recycling: Reuse as NF membranes by polyelectrolyte layer-by-layer deposition 

    Moradi, Mohammad Reza; Pihlajamäki, Arto; Hesampour, Mehrdad; Ahlgren, Jonni; Mänttäri, Mika (Elsevier, 06.05.2019)
    Nowadays, end-of-life (EoL) reverse osmosis (RO) membranes are considered as waste, hence they are incinerated or discarded in landfills. Due to the environmental problem of disposed membranes, their reuse as nanofiltration ...
  • Polyelektrolyyteillä pinnoitettujen membraanien turpoamisen tutkiminen 

    Liikanen, Joonas (2017)
    Tämän työn tavoitteena oli tutkia suolan vaikutusta Layer-by-Layer-tekniikalla pinnoitettujen polyelektrolyyttimonikerrosten turpoamiseen. Kerrokset valmistettiin heikoista polyelektrolyyteistä polyakryylihappo ja ...
LUT-yliopisto
PL 20
53851 Lappeenranta
Ota yhteyttä | Tietosuoja | Saavutettavuusseloste
 

 

Tämä kokoelma

JulkaisuajatTekijätNimekkeetKoulutusohjelmaAvainsanatSyöttöajatYhteisöt ja kokoelmat

Omat tiedot

Kirjaudu sisäänRekisteröidy
LUT-yliopisto
PL 20
53851 Lappeenranta
Ota yhteyttä | Tietosuoja | Saavutettavuusseloste