Ultrasound-assisted electrochemical treatment of wastewaters containing organic pollutants by using novel Ti/Ta2O5-SnO2 electrodes
Shestakova, Marina (2016-07-08)
Väitöskirja
Shestakova, Marina
08.07.2016
Lappeenranta University of Technology
Acta Universitatis Lappeenrantaensis
Julkaisun pysyvä osoite on
https://urn.fi/URN:ISBN:978-952-265-984-2
https://urn.fi/URN:ISBN:978-952-265-984-2
Tiivistelmä
Advanced oxidation processes (AOPs) are modern methods using reactive hydroxyl
radicals for the mineralization of organic pollutants into simple inorganic compounds,
such as CO2 and H2O. Among AOPs electrochemical oxidation (EO) is a method suitable
for coloured and turbid wastewaters. The degradation of pollutants occurs on
electrocatalytic electrodes. The majority of electrodes contain in their structure either
expensive materials (diamond and Pt-group metals) or are toxic for the environment
compounds (Sb or Pb). One of the main disadvantages of electrochemical method is the
polarization and contamination of electrodes due to the deposition of reaction products
on their surface, which results in diminishing of the process efficiency. Ultrasound
combined with the electrochemical degradation process eliminates electrode
contamination because of the continuous mechanical cleaning effect produced by the
formation and collapse of acoustic cavitation bubbles near to the electrode surface.
Moreover, high frequency ultrasound generates hydroxyl radicals at water sonolysis.
Ultrasound-assisted EO is a non-selective method for oxidation of different organic
compounds with high degradation efficiencies.
The aim of this research was to develop novel sustainable and cost-effective electrodes
working as electrocatalysts and test their activity in electrocatalytic oxidation of organic
compounds such as dyes and organic acids. Moreover, the goal of the research was to
enhance the efficiency of electrocatalytic degradation processes by assisting it with
ultrasound in order to eliminate the main drawbacks of a single electrochemical oxidation
such as electrodes polarization and passivation. Novel Ti/Ta2O5-SnO2 electrodes were
developed and found to be electrocatalytically active towards water (with 5% Ta content,
10 oxide film layers) and organic compounds oxidation (with 7.5% Ta content, 8 oxide
film layers) and therefore these electrodes can be applicable in both environmental and
energy fields. The synergetic effect of combined electrolysis and sonication was shown
while conducting sonoelectrochemical (EO/US) degradation of methylene blue (MB) and
formic acid (FA). Complete degradation of MB and FA was achieved after 45 and 120
min of EO/US process respectively in neutral media. Mineralization efficiency of FA over
95% was obtained after 2 h of degradation using high frequency ultrasound (381, 863,
1176 kHz) combined with 9.1 mA/cm2 current density. EO/US degradation of MB
provided over 75% mineralization in 8 h. High degradation kinetic rates and mineralization efficiencies of model pollutants obtained in EO/US experiments provide
the preconditions for further extrapolation of this treatment method to pilot scale studies
with industrial wastewaters.
radicals for the mineralization of organic pollutants into simple inorganic compounds,
such as CO2 and H2O. Among AOPs electrochemical oxidation (EO) is a method suitable
for coloured and turbid wastewaters. The degradation of pollutants occurs on
electrocatalytic electrodes. The majority of electrodes contain in their structure either
expensive materials (diamond and Pt-group metals) or are toxic for the environment
compounds (Sb or Pb). One of the main disadvantages of electrochemical method is the
polarization and contamination of electrodes due to the deposition of reaction products
on their surface, which results in diminishing of the process efficiency. Ultrasound
combined with the electrochemical degradation process eliminates electrode
contamination because of the continuous mechanical cleaning effect produced by the
formation and collapse of acoustic cavitation bubbles near to the electrode surface.
Moreover, high frequency ultrasound generates hydroxyl radicals at water sonolysis.
Ultrasound-assisted EO is a non-selective method for oxidation of different organic
compounds with high degradation efficiencies.
The aim of this research was to develop novel sustainable and cost-effective electrodes
working as electrocatalysts and test their activity in electrocatalytic oxidation of organic
compounds such as dyes and organic acids. Moreover, the goal of the research was to
enhance the efficiency of electrocatalytic degradation processes by assisting it with
ultrasound in order to eliminate the main drawbacks of a single electrochemical oxidation
such as electrodes polarization and passivation. Novel Ti/Ta2O5-SnO2 electrodes were
developed and found to be electrocatalytically active towards water (with 5% Ta content,
10 oxide film layers) and organic compounds oxidation (with 7.5% Ta content, 8 oxide
film layers) and therefore these electrodes can be applicable in both environmental and
energy fields. The synergetic effect of combined electrolysis and sonication was shown
while conducting sonoelectrochemical (EO/US) degradation of methylene blue (MB) and
formic acid (FA). Complete degradation of MB and FA was achieved after 45 and 120
min of EO/US process respectively in neutral media. Mineralization efficiency of FA over
95% was obtained after 2 h of degradation using high frequency ultrasound (381, 863,
1176 kHz) combined with 9.1 mA/cm2 current density. EO/US degradation of MB
provided over 75% mineralization in 8 h. High degradation kinetic rates and mineralization efficiencies of model pollutants obtained in EO/US experiments provide
the preconditions for further extrapolation of this treatment method to pilot scale studies
with industrial wastewaters.
Kokoelmat
- Väitöskirjat [1029]