Hyppää sisältöön
    • Suomeksi
    • På svenska
    • In English
  • Suomeksi
  • In English
  • Kirjaudu
Näytä aineisto 
  •   Etusivu
  • LUTPub
  • Diplomityöt ja Pro gradu -tutkielmat
  • Näytä aineisto
  •   Etusivu
  • LUTPub
  • Diplomityöt ja Pro gradu -tutkielmat
  • Näytä aineisto
JavaScript is disabled for your browser. Some features of this site may not work without it.

Finite element analysis of paperboard packages under compressional force

Zaheer, Minhaj (2016)

Katso/Avaa
MINHAJ-THESIS.pdf (3.368Mb)
Lataukset: 


Diplomityö

Zaheer, Minhaj
2016

Näytä kaikki kuvailutiedot
Julkaisun pysyvä osoite on
http://urn.fi/URN:NBN:fi-fe2016100424810

Tiivistelmä

This master's thesis studies paperboard failure under compressional forces with aid of modeling. Compressional modeling of paperboard box was done in ABAQUS and conditions were applied to test the feasibility of model. Box was modeled by applying crease pattern at the edges of box, stresses and elastic limits were observed and compared with the normal (without creasing) paperboard box. Then, eigenvalue analysis was performed on single panel and paperboard box to determine the critical stresses and critical forces. The simulations results were then compared with the theoretical calculations and it was perceived that the results were close enough to calculated values.
Kokoelmat
  • Diplomityöt ja Pro gradu -tutkielmat [9984]

Samankaltainen aineisto

Näytetään aineisto, joilla on samankaltaisia nimekkeitä, tekijöitä tai asiasanoja.

  • Enhancing the 3-dimensional forming of paperboard with modelling and simulation 

    Awais, Muhammad (2016)
    This thesis work was based on the enhancing of 3-dimensional forming of paperboard tray package by adopting line creasing pattern and analysis of the results with the help of mathematical modelling and simulation. The aim ...
  • Pattern design of micro-perforation on composite material for modified atmosphere packaging 

    Zhang, Lu (2016)
    The extrusion-coated paperboard tray packaging which contains a tray container and a piece of lidding film is widely used along with MAP technology in fresh food packaging industry. Much research has been done on perforation ...
  • Kuitupakkausten konvertointilaitteet – nykytila ja kehitysnäkymät 

    Leminen, Ville (2008)
    Diplomityössä selvitettiin kartonkipakkausten konvertoimiseen käytettäviä laitteistoja ja niiden valmistajia. Tuote johon työssä keskityttiin, oli muovipinnoitetusta taivekartongista valmistettu kartonkivuoka. Työssä ...
LUT-yliopisto
PL 20
53851 Lappeenranta
Ota yhteyttä | Lähetä palautetta | Tietosuoja | Saavutettavuusseloste
 

 

Tämä kokoelma

JulkaisuajatTekijätNimekkeetKoulutusohjelmaAvainsanatSyöttöajatYhteisöt ja kokoelmat

Omat tiedot

Kirjaudu sisäänRekisteröidy
LUT-yliopisto
PL 20
53851 Lappeenranta
Ota yhteyttä | Lähetä palautetta | Tietosuoja | Saavutettavuusseloste