Hyppää sisältöön
    • Suomeksi
    • På svenska
    • In English
  • Suomeksi
  • In English
  • Kirjaudu
Näytä aineisto 
  •   Etusivu
  • LUTPub
  • Diplomityöt ja Pro gradu -tutkielmat
  • Näytä aineisto
  •   Etusivu
  • LUTPub
  • Diplomityöt ja Pro gradu -tutkielmat
  • Näytä aineisto
JavaScript is disabled for your browser. Some features of this site may not work without it.

Spray droplet size distribution measurement

Skripnikov, Dmitry (2016)

Katso/Avaa
Dmitry_Skripnikov_Master's_Thesis_final_draft.pdf (3.441Mb)
Lataukset: 


Diplomityö

Skripnikov, Dmitry
2016

Näytä kaikki kuvailutiedot
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi-fe2016102625602

Tiivistelmä

Spray nozzles are used in Nuclear Power Plants in order to condense and decrease the pressure of vapor in containment volume during Loss of Coolant Accidents and in pressurizer during its normal operation. Spray droplet size distribution and mean droplet diameters are needed for calculation of heat and mass transfer between the vapor and spray droplets. Computational Fluid Dynamic (CFD) codes can be used to simulate the spray flow and to test the performance of different spray nozzles.

The present Thesis deals with the spray droplet size distribution measurements of three pressure-swirl nozzles of different nominal capacities in the air atmosphere at room temperature by means of Shadowgraphy technique. The goal of this measurements is to get experimental data on droplet sizes in order to use it to validate spray droplet size distribution models built in CFD codes.
Kokoelmat
  • Diplomityöt ja Pro gradu -tutkielmat [11666]
LUT-yliopisto
PL 20
53851 Lappeenranta
Ota yhteyttä | Tietosuoja | Saavutettavuusseloste
 

 

Tämä kokoelma

JulkaisuajatTekijätNimekkeetKoulutusohjelmaAvainsanatSyöttöajatYhteisöt ja kokoelmat

Omat tiedot

Kirjaudu sisäänRekisteröidy
LUT-yliopisto
PL 20
53851 Lappeenranta
Ota yhteyttä | Tietosuoja | Saavutettavuusseloste