Real-time laboratory interconnection for smart grid testing
Raussi, Petra (2017)
Diplomityö
Raussi, Petra
2017
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi-fe2017121955973
https://urn.fi/URN:NBN:fi-fe2017121955973
Tiivistelmä
Future renewable energy systems, which are based on decentralized energy production, are smart grids that embody advanced automation and communication technologies to maintain the level of reliability and power quality present in traditional centralized power systems. In this thesis, a real-time laboratory interconnection proposed in the European Research Infrastructure supporting Smart Grid Systems Technology Development, Validation and Roll Out (ERIGrid) project was implemented in Multipower laboratory at VTT Technical Research Centre of Finland. The main goal of ERIGrid is to develop integrated research infrastructure for smart grids.
A literature review of relevant remote connections and interconnections conducted previously are presented. Relevant standards IEC 61850 and Common Information Model (CIM) and their harmonization are discussed. The case laboratory and Joint Research Facility for Smart Energy Networks with Distributed Energy Resources (JaNDER), a concept for implementing interconnection between laboratories developed in the ERIGrid project, are portrayed. Based on the information presented the real-time laboratory interconnection was implemented and testing was conducted to obtain possible example delays for data transfer via the interconnection.
The key result of this thesis is that the implementation of the real-time laboratory interconnection was successful. Possible example delays were obtained during the testing, but further testing is needed to obtain statistical delay values. Tulevaisuuden hajautettuun energiantuotantoon perustuvat uusiutuvat energiajärjestelmät ovat älyverkkoja, jotka käsittävät kehittyneitä automaatio- ja tiedonsiirtoteknologioita sähkön laadun ja luotettavuuden ylläpitämiseksi perinteisiä keskitettyjä sähköjärjestelmiä vastaavalla tasolla. Tässä diplomityössä toteutettiin ERIGrid-projektissa ehdotettu laboratorioiden reaaliaikainen yhteiskäyttö Teknologian Tutkimuskeskus VTT:n Multipower-laboratoriossa. ERIGrid-projektin (European Research Infrastructure supporting Smart Grid Systems Technology Development, Validation and Roll Out) päätavoitteena on kehittää integroitu tutkimusinfrastruktuuri älyverkoille.
Kirjallisuustutkimuksessa käsitellään aiemmin toteutetut olennaiset etäyhteydet ja yhteiskäytöt. Työssä käsitellään olennaiset standardit IEC 61850 ja Common Information Model (CIM) ja niiden yhtenäistäminen. Työssä kuvataan myös case laboratorio ja JaNDER (Joint Research Facility for Smart Energy Networks with Distributed Energy Resources), joka on ERIGrid-projektissa kehitetty laboratorioiden yhteiskäytön toteutuskonsepti. Laboratorioiden reaaliaikainen yhteiskäyttö toteutettiin perustuen työssä käsiteltyyn informaatioon, lisäksi toteutettiin testaus yhteiskäytön tiedonsiirron mahdollisten esimerkkiviiveiden saamiseksi.
Tämän diplomityön keskeinen tulos on se, että laboratorioiden reaaliaikaisen yhteiskäytön toteutus oli onnistunut. Mahdollisia esimerkkiviiveitä saatiin kirjattua testauksen aikana, mutta tilastollisien viivearvojen hankkimiseksi tarvitaan lisätestejä.
A literature review of relevant remote connections and interconnections conducted previously are presented. Relevant standards IEC 61850 and Common Information Model (CIM) and their harmonization are discussed. The case laboratory and Joint Research Facility for Smart Energy Networks with Distributed Energy Resources (JaNDER), a concept for implementing interconnection between laboratories developed in the ERIGrid project, are portrayed. Based on the information presented the real-time laboratory interconnection was implemented and testing was conducted to obtain possible example delays for data transfer via the interconnection.
The key result of this thesis is that the implementation of the real-time laboratory interconnection was successful. Possible example delays were obtained during the testing, but further testing is needed to obtain statistical delay values.
Kirjallisuustutkimuksessa käsitellään aiemmin toteutetut olennaiset etäyhteydet ja yhteiskäytöt. Työssä käsitellään olennaiset standardit IEC 61850 ja Common Information Model (CIM) ja niiden yhtenäistäminen. Työssä kuvataan myös case laboratorio ja JaNDER (Joint Research Facility for Smart Energy Networks with Distributed Energy Resources), joka on ERIGrid-projektissa kehitetty laboratorioiden yhteiskäytön toteutuskonsepti. Laboratorioiden reaaliaikainen yhteiskäyttö toteutettiin perustuen työssä käsiteltyyn informaatioon, lisäksi toteutettiin testaus yhteiskäytön tiedonsiirron mahdollisten esimerkkiviiveiden saamiseksi.
Tämän diplomityön keskeinen tulos on se, että laboratorioiden reaaliaikaisen yhteiskäytön toteutus oli onnistunut. Mahdollisia esimerkkiviiveitä saatiin kirjattua testauksen aikana, mutta tilastollisien viivearvojen hankkimiseksi tarvitaan lisätestejä.