Selaus avainsanan mukaan kokoelmassa "additive manufacturing"Väitöskirjat
Aineistot 1-6 / 6
-
A conceptual, holistic framework to overcome limitations and constraints of design in laser based powder bed fusion of metals: Case novel separation and purification units
Acta Universitatis Lappeenrantaensis (Lappeenranta-Lahti University of Technology LUT, 14.12.2023)The advancements of digitization and the fourth industrial revolution has introduced several modern technologies, among which additive manufacturing (AM), known also as industrial 3D printing, has significant role. Additive ... -
Development of learning methodology of additive manufacturing for mechanical engineering students in higher education
Acta Universitatis Lappeenrantaensis (Lappeenranta-Lahti University of Technology LUT, 07.07.2021)The main aim of this thesis was to research the learning of additive manufacturing (AM) and the impact of using multiple AM technologies as a form of learning. The goal was to develop a new methodology for learning additive ... -
Experimental study on the influence of wall thickness and scanning strategy in laser powder bed fusion of Ni-Mn-Ga magnetic shape memory alloys
Acta Universitatis Lappeenrantaensis : 1276 (Lappeenranta-Lahti University of Technology LUT, 09.03.2026)This dissertation examines the optimization of laser powder bed fusion (PBF-LB) for the fabrication of Ni–Mn–Ga magnetic shape memory (MSM) alloys with controlled crystallographic orientation and improved magneto-functional ... -
Laser powder bed fusion for the manufacture of Ni-Mn-Ga magnetic shape memory alloy actuators
Acta Universitatis Lappeenrantaensis (Lappeenranta-Lahti University of Technology LUT, 03.12.2021)The ability of the magnetic shape memory (MSM) alloy Ni-Mn-Ga to exhibit large magnetic-field-induced strain (MFIS) of 6-12% makes it a promising actuation material for small devices in which traditional mechanisms and ... -
Laser powder bed fusion of steels : case studies on microstructures, mechanical properties, and notch-load interactions
Acta Universitatis Lappeenrantaensis (Lappeenranta-Lahti University of Technology LUT, 10.11.2022)Additive manufacturing has evolved over the last few decades from utilising a prototyping approach to favouring a fabrication method. Consequently, this technology has become recognised as a potential replacement for ... -
Life cycle cost-driven design for additive manufacturing : the frontier to sustainable manufacturing in laser-based powder bed fusion
Acta Universitatis Lappeenrantaensis (Lappeenranta-Lahti University of Technology LUT, 27.09.2021)Additive manufacturing (AM) is a manufacturing method that creates components in a layer-wise manner. Laser-based powder bed fusion (L-PBF) is one of the most used AM subcategories to manufacture metal components, referred ...





