Hyppää sisältöön
    • Suomeksi
    • På svenska
    • In English
  • Suomeksi
  • In English
  • Kirjaudu
Näytä aineisto 
  •   Etusivu
  • LUTPub
  • Tieteelliset julkaisut
  • Näytä aineisto
  •   Etusivu
  • LUTPub
  • Tieteelliset julkaisut
  • Näytä aineisto
JavaScript is disabled for your browser. Some features of this site may not work without it.

Fatigue strength assessment of duplex and super-duplex stainless steels by 4R method

Björk, Timo; Mettänen, Heli; Ahola, Antti; Lindgren, Mari; Terva, Juuso (2018-10-04)

Katso/Avaa
bjork_mettanen_ahola_et_al_fatigue_strength_assessment_final_draft.pdf (1.645Mb)
Lataukset: 


Post-print / Final draft

Björk, Timo
Mettänen, Heli
Ahola, Antti
Lindgren, Mari
Terva, Juuso
04.10.2018

Welding in the World

62

6

1285-1300

Springer Berlin Heidelberg

School of Energy Systems

Kaikki oikeudet pidätetään.
© 2018 Springer Nature Switzerland AG
https://doi.org/10.1007/s40194-018-0657-8
Näytä kaikki kuvailutiedot
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi-fe2018110947815

Tiivistelmä

Duplex and super-duplex stainless steels are increasingly used in applications where good fatigue strength is demanded in addition to corrosion resistance. In this research work, the fatigue strength of duplex and super-duplex steels was investigated experimentally, using standard fatigue strength assessment methods, and theoretically, using conventional design methods and a novel effective notch stress-based procedure, the 4R method. The experimental tests included testing of welded joints with and without post-weld treatment. The experimental results were compared with the 4R method. The test results indicated good fatigue strength properties for both materials in the as-welded (ASW) condition, and post-weld treatment by high frequency impact (HFMI)-treatment improved the fatigue resistance at low stress ratios. No improvement, however, was found in the case of high mean stress of the applied load. The results obtained by the theoretical investigation agreed quite well with the experimental results.

Lähdeviite

Björk, T., Mettänen, H., Ahola, A. et al. Fatigue strength assessment of duplex and super-duplex stainless steels by 4R method. Welding in the World (2018) 62: 1285. DOI: https://doi.org/10.1007/s40194-018-0657-8

Alkuperäinen verkko-osoite

https://link.springer.com/article/10.1007%2Fs40194-018-0657-8
Kokoelmat
  • Tieteelliset julkaisut [1257]
LUT-yliopisto
PL 20
53851 Lappeenranta
Ota yhteyttä | Tietosuoja | Saavutettavuusseloste
 

 

Tämä kokoelma

JulkaisuajatTekijätNimekkeetKoulutusohjelmaAvainsanatSyöttöajatYhteisöt ja kokoelmat

Omat tiedot

Kirjaudu sisäänRekisteröidy
LUT-yliopisto
PL 20
53851 Lappeenranta
Ota yhteyttä | Tietosuoja | Saavutettavuusseloste