Hyppää sisältöön
    • Suomeksi
    • På svenska
    • In English
  • Suomeksi
  • In English
  • Kirjaudu
Näytä aineisto 
  •   Etusivu
  • LUTPub
  • Tieteelliset julkaisut
  • Näytä aineisto
  •   Etusivu
  • LUTPub
  • Tieteelliset julkaisut
  • Näytä aineisto
JavaScript is disabled for your browser. Some features of this site may not work without it.

Normalization-Based Approach to Electric Motor BVR Related Capacitances Computation

Ahola, Jero; Muetze, Annette; Niemelä, Markku; Romanenko, Aleksei (2019-02-11)

Katso/Avaa
ahola_et_al_normalizaton-based_approach_final_draft.pdf (1.329Mb)
Lataukset: 


Post-print / Final draft

Ahola, Jero
Muetze, Annette
Niemelä, Markku
Romanenko, Aleksei
11.02.2019

IEEE Transactions on Industry Applications

55

3

2770-2780

IEEE

School of Energy Systems

Kaikki oikeudet pidätetään.
© 2019 IEEE
https://doi.org/10.1109/TIA.2019.2898850
Näytä kaikki kuvailutiedot
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi-fe2019090226389

Tiivistelmä

Electrical discharge machining bearing currents that may occur within electric machines of variable-speed-drive motor systems have been recognized for a long time. One key influential factor, the machine's capacitive voltage divider “bearing-voltage-ratio” (BVR) strongly depends on the rotor-to-frame and the stator winding-to-rotor capacitances; these are, in turn, affected by the design of the machine's stator slot. This paper presents an approach to improve the accuracy with which these capacitances can be estimated. It is based on the well-known plate capacitance equation which is then corrected by normalization functions. The functions are defined by extensive parameter studies using electrostatic finite element method (FEM) simulations. The final expressions not only allow for the prediction of the stator-winding-to-rotor and rotor-to-frame capacitances, they are also readily applicable. Thereby, they facilitate, for example, the clear-cut study of the sensitivity of the BVR towards changes in the different stator slot parameters.

Lähdeviite

Ahola, J., Muetze, A., Niemelä, M., Romanenko, A. (2019). Normalization-Based Approach to Electric Motor BVR Related Capacitances Computation. IEEE Transactions on Industry Applications, vol. 55, issue 3. pp. 2770-2780. DOI: 10.1109/TIA.2019.2898850

Kokoelmat
  • Tieteelliset julkaisut [1212]
LUT-yliopisto
PL 20
53851 Lappeenranta
Ota yhteyttä | Tietosuoja | Saavutettavuusseloste
 

 

Tämä kokoelma

JulkaisuajatTekijätNimekkeetKoulutusohjelmaAvainsanatSyöttöajatYhteisöt ja kokoelmat

Omat tiedot

Kirjaudu sisäänRekisteröidy
LUT-yliopisto
PL 20
53851 Lappeenranta
Ota yhteyttä | Tietosuoja | Saavutettavuusseloste