Model Based Unbalance Identification for Paper Machine's Tube Roll
Choudhury, Tuhin; Kurvinen, Emil; Sopanen, Jussi (2019-06-14)
Post-print / Final draft
Choudhury, Tuhin
Kurvinen, Emil
Sopanen, Jussi
14.06.2019
73
3375-3384
Springer, Cham
Mechanisms and Machine Science book series
School of Energy Systems
Kaikki oikeudet pidätetään.
© Springer Nature Switzerland AG 2019
© Springer Nature Switzerland AG 2019
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi-fe2020102085737
https://urn.fi/URN:NBN:fi-fe2020102085737
Tiivistelmä
Mass unbalance is a major concern in modern day rotating machinery. For single and double disc rotor bearing systems, model based techniques have been used to identify the unbalance. The aim of this research is to predict the unbalance in a similar way for a paper machine’s tube roll using its virtual model. In this case study, the rotor is a large diameter continuous tube with thin walls and without any mounted disc. To identify the unbalance magnitude and phase, modal expansion and equivalent load minimization by least squares is used. The distributed equivalent load is sorted using two different methods. The first method considers only the isolated maximum load. In the second method, the load at all the nodes are taken into account. This first method is tested on a single disc rotor bearing system from literature and the unbalance parameters were predicted with good accuracy. However, for the paper machine’s tube roll, due to its continuous structure, the equivalent load is distributed more evenly across the rotor. Therefore the second method is able to predict the unbalance parameters with better accuracy.
Lähdeviite
Choudhury T., Kurvinen E., Sopanen J. (2019) Model Based Unbalance Identification for Paper Machine’s Tube Roll. In: Uhl T. (eds) Advances in Mechanism and Machine Science. IFToMM WC 2019. Mechanisms and Machine Science, vol 73. Springer, Cham. https://doi.org/10.1007/978-3-030-20131-9_333
Alkuperäinen verkko-osoite
https://link.springer.com/chapter/10.1007%2F978-3-030-20131-9_333Kokoelmat
- Tieteelliset julkaisut [1212]