Hyppää sisältöön
    • Suomeksi
    • På svenska
    • In English
  • Suomeksi
  • In English
  • Kirjaudu
Näytä aineisto 
  •   Etusivu
  • LUTPub
  • Tieteelliset julkaisut
  • Näytä aineisto
  •   Etusivu
  • LUTPub
  • Tieteelliset julkaisut
  • Näytä aineisto
JavaScript is disabled for your browser. Some features of this site may not work without it.

The effects of pretreatment and coating on the formability of extrusion‐coated multilayer paperboard–plastic composites

Franke, Wilken; Leminen, Ville; Groche, Peter; Varis, Juha (2020-10-30)

Katso/Avaa
franke_leminen_et_al_the_effects_of_pretreatment_post-print.pdf (2.576Mb)
Lataukset: 


Post-print / Final draft

Franke, Wilken
Leminen, Ville
Groche, Peter
Varis, Juha
30.10.2020

Packaging Technology and Science

34

2

105-116

John Wiley & Sons

School of Energy Systems

https://doi.org/10.1002/pts.2542
Näytä kaikki kuvailutiedot
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi-fe202101071225

Tiivistelmä

Sustainable materials like paperboard can substitute for crude oil‐based polymers in packaging applications and, by doing that, reduce the negative environmental impacts caused by plastic waste. For a broader application in the packaging industry, the forming of paperboard needs to overcome its limited forming behaviour and barrier properties. The presented work aims to influence the forming behaviour of uncoated and polyethylene terephthalate (PET)‐coated paperboard with additives like water, gelatin and soap. Furthermore, the differences in the mechanical behaviour of coated and uncoated materials are investigated. For the studies, tensile, bulge and forming tests were combined with different optical measurement methods. The investigations showed that the overall forming behaviour is affected by the mentioned additives and can be improved. Additionally, the interaction of the coating and substrate paper is investigated under different load conditions.

Lähdeviite

Franke, W., Leminen, V., Groche, P., Varis, J. The effects of pre-treatment and coating on the formability of extrusion-coated multi-layer paperboard-plastic composites. Packaging Technology and Science. Volume 34, Issue 2. pp. 105-116, 2021. DOI: https://doi.org/10.1002/pts.2542

Alkuperäinen verkko-osoite

https://onlinelibrary.wiley.com/doi/10.1002/pts.2542
Kokoelmat
  • Tieteelliset julkaisut [1140]
LUT-yliopisto
PL 20
53851 Lappeenranta
Ota yhteyttä | Tietosuoja | Saavutettavuusseloste
 

 

Tämä kokoelma

JulkaisuajatTekijätNimekkeetKoulutusohjelmaAvainsanatSyöttöajatYhteisöt ja kokoelmat

Omat tiedot

Kirjaudu sisäänRekisteröidy
LUT-yliopisto
PL 20
53851 Lappeenranta
Ota yhteyttä | Tietosuoja | Saavutettavuusseloste