Dissimilar friction stir welding of Al to non-Al metallic materials: An overview
Shankar, Sachindra; Mehta, Kush P.; Chattopadhyaya, Somnath; Vilaça, Pedro (2022-06-15)
Huom!
Sisältö avataan julkiseksi: 16.06.2024
Sisältö avataan julkiseksi: 16.06.2024
Post-print / Final draft
Shankar, Sachindra
Mehta, Kush P.
Chattopadhyaya, Somnath
Vilaça, Pedro
15.06.2022
Materials Chemistry and Physics
288
Elsevier
School of Energy Systems
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi-fe2022062950557
https://urn.fi/URN:NBN:fi-fe2022062950557
Tiivistelmä
The paper presents a comprehensive review on dissimilar friction stir welding (FSW) of Al to non-Al metallic materials, wherein the combination of Al–Mg, Al–Cu, Al-steel and Al–Ti are covered. The summary revealed that FSW is observed as one of the most feasible solutions in the family of welding in case of dissimilar materials combinations of Al to non-Al metallic materials. The challenges such as the formation of intermetallic compounds, defects, and degradation of mechanical properties at the joint area are extensively managed in the case of dissimilar FSW compared to dissimilar conventional welding.
Lähdeviite
Shankar, S., Mehta K.P., Chattopadhyaya, S., Vilaça, P. (2022). Dissimilar friction stir welding of Al to non-Al metallic materials: An overview. Materials Chemistry and Physics, vol. 288. DOI: 10.1016/j.matchemphys.2022.126371
Alkuperäinen verkko-osoite
https://www.sciencedirect.com/science/article/abs/pii/S0254058422006770?via%3DihubKokoelmat
- Tieteelliset julkaisut [1170]