Saattolämmitysjärjestelmän mitoitus ja toteutus
Uusitalo, Kimmo (2022)
Diplomityö
Uusitalo, Kimmo
2022
School of Energy Systems, Sähkötekniikka
Kaikki oikeudet pidätetään.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi-fe2022092960454
https://urn.fi/URN:NBN:fi-fe2022092960454
Tiivistelmä
Sähkölämmitykset ovat teknologian kehityksen ja käyttäjien tietoisuuden kasvamisen seurauksena alkaneet kiinnostaa yhä laajemmin pohjoismaissa. Erityisesti tuotantolaitokset ovat kiinnostuneet sovelluksien avulla saatavasta datasta ja tuotantolinjojen turvaamisesta yhä paremmin. Silti putkistot rakennetaan kokonaisiksi useimmiten ennen saattolämmityksien ja eristysten asennustyötä.
Tässä työssä selvitetään kolmen putkilinjan saattolämmityshankkeen etenemistä, kun putkilinjat rakennetaan lohkoissa. Työn teoreettisessa osuudessa analysoidaan muiden menetelmien sopivuutta hankkeen tarkoituksessa ja tehdään vertailua vanhan ja uuden teknologian lämmityskaapeleiden välillä.
Työssä esitetään tarkasti keskeisimpien komponenttien ja toimilaitteiden rakenteet, käyttötarkoitukset, ominaisuudet sekä oikeat asennustavat toimivan järjestelmän aikaansaamiseksi.
Työn laskennallisessa osuudessa esitetään saattolämmitysjärjestelmän mitoitukseen tarpeelliset teoreettiset yhtälöt ja laskentamenetelmät. Tutkimuksessa selvitettiin lämmityspiirin lämpöhäviöt ja analysoitiin eristevahvuuden vaikutukset saatuihin tuloksiin. Lopuksi verrattiin saatuja arvoja valmistajan rakentaman ohjelman tuloksiin.
Tutkimuksessa saatiin ratkaistua, että lämmitysjärjestelmä on mahdollista rakentaa myös
osina, mutta se ei ole kaikissa kohteissa järkevin menettelytapa. As a result of technological development and increased user awareness, electric heating has begun to attract more interest in the Nordic countries. In particular, production plants are interested in the data obtained with the help of applications and in securing production lines even better. Even so, the pipelines are mostly built whole before the installation work of the heating systems and insulation.
This work investigates the progress of a three-pipeline co-heating project in which the pipelines are built in blocks. In the theoretical part of the work, the suitability of other methods for the purpose of the project is analyzed and a comparison is made between old and new technology heating cables.
The work accurately presents the structures, purposes of use, properties and correct installation methods of the most important components and actuators in order to create a functioning system.
In the calculation part of the work, the necessary formulas and calculation methods for dimensioning the heating system are presented. The study investigated the heat losses of the heating circuit and analyzed the effects of insulation strength on the obtained results. Finally, the obtained values were compared with the results of the program built by the manufacturer.
The research concluded that it is also possible to build the heating system in parts, but it is not the most reasonable procedure in all locations.
Tässä työssä selvitetään kolmen putkilinjan saattolämmityshankkeen etenemistä, kun putkilinjat rakennetaan lohkoissa. Työn teoreettisessa osuudessa analysoidaan muiden menetelmien sopivuutta hankkeen tarkoituksessa ja tehdään vertailua vanhan ja uuden teknologian lämmityskaapeleiden välillä.
Työssä esitetään tarkasti keskeisimpien komponenttien ja toimilaitteiden rakenteet, käyttötarkoitukset, ominaisuudet sekä oikeat asennustavat toimivan järjestelmän aikaansaamiseksi.
Työn laskennallisessa osuudessa esitetään saattolämmitysjärjestelmän mitoitukseen tarpeelliset teoreettiset yhtälöt ja laskentamenetelmät. Tutkimuksessa selvitettiin lämmityspiirin lämpöhäviöt ja analysoitiin eristevahvuuden vaikutukset saatuihin tuloksiin. Lopuksi verrattiin saatuja arvoja valmistajan rakentaman ohjelman tuloksiin.
Tutkimuksessa saatiin ratkaistua, että lämmitysjärjestelmä on mahdollista rakentaa myös
osina, mutta se ei ole kaikissa kohteissa järkevin menettelytapa.
This work investigates the progress of a three-pipeline co-heating project in which the pipelines are built in blocks. In the theoretical part of the work, the suitability of other methods for the purpose of the project is analyzed and a comparison is made between old and new technology heating cables.
The work accurately presents the structures, purposes of use, properties and correct installation methods of the most important components and actuators in order to create a functioning system.
In the calculation part of the work, the necessary formulas and calculation methods for dimensioning the heating system are presented. The study investigated the heat losses of the heating circuit and analyzed the effects of insulation strength on the obtained results. Finally, the obtained values were compared with the results of the program built by the manufacturer.
The research concluded that it is also possible to build the heating system in parts, but it is not the most reasonable procedure in all locations.