Energiatalouden raportoinnin kehittäminen Stora Enso Varkauden tehtailla
Korhonen, Vili (2023)
Diplomityö
Korhonen, Vili
2023
School of Energy Systems, Energiatekniikka
Kaikki oikeudet pidätetään.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi-fe2023022128028
https://urn.fi/URN:NBN:fi-fe2023022128028
Tiivistelmä
Tässä diplomityössä on käsitelty Stora Enso Varkauden tehtaiden energiaraportointia. Tarkastelun kohteena olivat tehtaan energiaraportoinnin nykytilanteen kartoitus ja, kuinka sähkö- lämpö- ja polttoaine-energiaraportit muodostuvat mittausten, laskentojen ja määritysten avulla. Työn tavoitteena oli tarkastella raporttien laskennat ja mittauspisteiden oikeellisuus, jotta muodostettavat raportit olisivat mahdollisimman tarkkoja ja johdonmukaisia. Lisäksi tavoitteena oli vähentää kuukausiraportointiin liittyvää, käsin tehtävää, tiedonsiirtoa.
Työn teoriaosuudessa käsitellään yleisellä tasolla metsäteollisuuden energiantuotantoa ja tuotannon seurantaan käytettäviä prosessimittauksia. Prosessimittauksia käytetään energia määrien laskentoihin ja teoriaosuudessa käydään lisäksi läpi Varkauden tehtaiden energiantuotannon seurantaan käytettävät järjestelmät. Työssä myös kartoitettiin energia- ja viranomaisraportoinnin nykytilanne ja velvoitteet.
Tutkimusosuudessa perehdyttiin energiataseiden määrittämiseen ja niihin haettavien tietojen sekä laskentojen oikeellisuuteen. Energiaraportoinnin osalta keskityttiin sähkö- ja lämpöenergiasta luotaviin raportteihin sekä polttoaineraportointiin.
Tarkastelun perusteella energiatalousraportointi on tällä hetkellä Varkauden tehtailla varsin hyvällä tasolla. Tuotantotasoja seurataan jatkuvasti ja tarvittavat mittaukset kalibroidaan mittaussuunnitelmien mukaisesti. Kehitysehdotuksena olisi polttoaineraportin tarkentaminen ja sisäisten mittapisteiden määräaikaistarkastukset. Viranomaisraportoinnin kehittäminen vaatisi virastojen ja tuotantotasoista kiinnostuneiden organisaatioiden järjestelmien muuttamista, johon ei yksittäisellä toimijalla ole vaikutusvaltaa. This Master’s thesis deals with energy reporting of Stora Enso Varkaus mill. The subject of the study was current situation of energy reporting and how electricity, heat and fuel reports are produced with process measurements and calculations. The main aim of study was check process measurement points and energy calculations in the reports so the data would be as accurate as possible. Another aim for this study was reduce the manual data transfer from file to file in monthly reporting.
The theoretical part deals with energy production in forest industry and how process measurement equipment are used to monitor and create data for reports. In addition, in theoretical part deals with which programs are used to monitoring of energy production in Varkaus mill and which are the requirements of authoritative reporting.
The work chapter deal with how energy balances in the mill are made and are the data and energy calculations correct. Electricity, heat and fuel reports were under focus and their formation was investigated and accuracy checked.
Based on the review energy reporting are currently at a fairly good level at the mill. Production levels are constantly monitored, and the most important measurement points are calibrated according to the measurement plans. For a development proposal would be the refinement of fuel report and schedule for inspect also internal measurement points. Development of authority reports would require changing their systems so that the data would transfer from one file to another. This would be so large change which an individual actor has no influence.
Työn teoriaosuudessa käsitellään yleisellä tasolla metsäteollisuuden energiantuotantoa ja tuotannon seurantaan käytettäviä prosessimittauksia. Prosessimittauksia käytetään energia määrien laskentoihin ja teoriaosuudessa käydään lisäksi läpi Varkauden tehtaiden energiantuotannon seurantaan käytettävät järjestelmät. Työssä myös kartoitettiin energia- ja viranomaisraportoinnin nykytilanne ja velvoitteet.
Tutkimusosuudessa perehdyttiin energiataseiden määrittämiseen ja niihin haettavien tietojen sekä laskentojen oikeellisuuteen. Energiaraportoinnin osalta keskityttiin sähkö- ja lämpöenergiasta luotaviin raportteihin sekä polttoaineraportointiin.
Tarkastelun perusteella energiatalousraportointi on tällä hetkellä Varkauden tehtailla varsin hyvällä tasolla. Tuotantotasoja seurataan jatkuvasti ja tarvittavat mittaukset kalibroidaan mittaussuunnitelmien mukaisesti. Kehitysehdotuksena olisi polttoaineraportin tarkentaminen ja sisäisten mittapisteiden määräaikaistarkastukset. Viranomaisraportoinnin kehittäminen vaatisi virastojen ja tuotantotasoista kiinnostuneiden organisaatioiden järjestelmien muuttamista, johon ei yksittäisellä toimijalla ole vaikutusvaltaa.
The theoretical part deals with energy production in forest industry and how process measurement equipment are used to monitor and create data for reports. In addition, in theoretical part deals with which programs are used to monitoring of energy production in Varkaus mill and which are the requirements of authoritative reporting.
The work chapter deal with how energy balances in the mill are made and are the data and energy calculations correct. Electricity, heat and fuel reports were under focus and their formation was investigated and accuracy checked.
Based on the review energy reporting are currently at a fairly good level at the mill. Production levels are constantly monitored, and the most important measurement points are calibrated according to the measurement plans. For a development proposal would be the refinement of fuel report and schedule for inspect also internal measurement points. Development of authority reports would require changing their systems so that the data would transfer from one file to another. This would be so large change which an individual actor has no influence.